The PWR Series allows for wash water to be reclaimed on the job site. Water is reclaimed by using the 20-foot water berm (included) to stop water from flowing down a drain or away from your area. The suction head draws wash water into a holding chamber where a second pump forces the water through an optional 10-micron bag filter before returning it to the holding tank for reuse or proper disposal. (The blue tanks in the picture here are NOT included – they are the optional 10-micron filters).Features: – 1/3 HP transfer pump– Oil absorbing boom/sock– Vacuum tank drain– 3-stage vacuum motor– Stainless-steel suction head– Cam lock fittings– 50-foot vacuum hose– 55-gallon capacity– 20-foot water bermOption1: 3 stage, 1500W, 12.5A full load 55-gallons 1/3 HP, 8.0A, 120VAC, 60Hz, 1Ø 6in.x20ft. 48x42x60in. 340 lb. 290 lb.Option2: Portable recovery system onlyOption3: Dual filters – Uses 10-micron bag #19-0249 and 50-micron bag #19-0267, includes 5 filter bagsOption4: Wheel kit – Includes two flat-free tires, powder coated steel frame, and handleSpecificationsWater Berm6 inches x 20 feetFilter Pump1/3 HP, 8.0A, 120VAC, 60 Hz, 1″Tank Holding Capacity55-gallonsVacuum Motor3-stage, 1500W, 12.5A full loadWeights & DimensionsNet Weight290 lbs.Shipping Weight340 lbs.Length48 in.Width42 in.Height60 in. Learn more about the importance of reclaiming water:More than 30 years ago, Congress passed a bill to address water pollution and poor water quality. The Clean Water Act monitors industrial and wastewater discharges and prevents untreated water from entering storm drains across all 50 states.Mi-T-M created a unique portable water reclaim system you can use anywhere. Designed to capture and recycle wash water, it’s the perfect solution for mobile washing and water recovery.Our portable system, with a 20″ rubber berm, creates a convenient containment dam to capture all your wastewater for proper disposal.The suction head contains small holes. These openings allow wastewater into the reclaim system, but keep large objects and debris out.If you need to clean up an oily spill or mess, you can use an oil absorption sock to the collection tank. The specially designed sock will only absorb oil and grease within the tank. When your job is done, you can easily dispose of the sock and these contaminants.You can also purchase a cyclone filter, which drops out larger particles, matter, and solids. It’s a highly effective filter, cleaning any wastewater down to 70 microns. The final filtration includes a removable bag filter.After treatment, the treated wastewater is as low as 5 microns and is clean enough to be used in a pressure washer.Mi-T-M’s portable water reclaim system is easy to use and very convenient. Most importantly, it helps you meet all the guidelines and requirements of the Clean Water Act.
